Hi Stampers!
Today let’s take a look at a new bundle from Stampin’ Up!®️ The bundle is called RHINO READY, and includes a stamp set and coordinating dies. As always, the bundle is priced at a 10% discount. The stamp set and the dies can also be purchased separately. The RHINO READY bundle is part of the STAMPIN’ UP! ONLINE EXCLUSIVES. ONLINE EXCLUSIVES products are only available in the Online Store, and new products will be added from time to time. Click VIEW to see RHINO READY product details.
Along with a look at the READY RHINO bundle, I have three cards to share. Each card is a different fun fold: a Slide Lock Gate Fold Card, a Partial Front Panel Card, and an Inner Z-Fold Card. Let’s look at the cards:
RHINO READY STAMP SET
RHINO READY DIES
THREE FUN FOLD CARDS
& THE RHINO READY BUNDLE
VIDEO
RHINO READY INNER Z-FOLD CARD
SUPPLIES FOR THIS CARD
* Ready Rhino stamp set
* Card base - Granny Apple Green cardstock; A-2 size, mine is 11” x 4 1/4” score and folded at 5 1/2” along the 11” side, but you can also use 8 1/2” x 5 1/2” scored and folded along the 8 1/2” side at 4 1/4”
* Layer - 6”x6” DSP, Brights - Granny Apple Green
* Inside panel - Basic White cardstock 8” x 5 1/2” scored at 4” and 6” along the 8” side
* Basic White cardstock for greeting focal image, and frame
* Ink - Memento Tuxedo Black; Stampin’ Blends- Gray Granite (light & dark), Crumb Cake (light)
* Dies - Layering Circles Dies - 2 7/8”, 2 5/8”, & 2 1/8” diameters and Something Fancy Dies (sentiment)
* Embellishments - 2022-2024 In Color Matte Dots - 5 Parakeet Party
* Adhesive
ASSEMBLY
* Fold the inside panel along the score lines - the 4” score line is a valley fold, the 6” score line is a mountain fold. This forms the Inner Z-fold panel.
* Stamp the rhino image on Basic White cardstock with the Tuxedo Black ink, stamp the other rhino image in the lower left hand corner of the inner panel, and color the images with Stampin’ Blends; stamp the sentiment on the inside panel (refer to photo) and stamp the “It’s a Great Day” sentiment on a scrap of basic white cardstock.
* Adhere the DSP to the card front by placing adhesive along the sides of the DSP and toward the bottom center only. Avoid the area that will be die cut.
* Open the card base, place the second largest circle die centered in the upper half of the card front, run through the die cut machine. Save the cardstock cut out to mat the focal image. Use the largest circle die to cut out a circle from Basic White cardstock. Place the second largest circle die centered on the die cut, and run it through the die cut machine. This creates the frame for the cards front. Now use the smallest circle die to cut out the rhino image. Finally die cut the Great Day sentiment with the die from the Something Fancy Dies.
* Adhere the rhino image to its mat. Adhere the frame to the card front around the cut out area, adhere the inner z-fold panel (see card photo for reference) inside the card, press dien the folded half of the panel, and close the card. Put adhesive on the left side of the back side of the focal image and place it inside the die cut area. It should be attached to the folded side of the inner panel.
* Place dimensionals on the back of the sentiment and adhere it to the front of the card.
* Place the embellishments on the card front.
INNER Z-FOLD CARD FROM VIDEO
SUPPLIES FOR THIS CARD
NOTE - the supplies for this card are the same as for the card above with the exception of colors and added Stampin’ Blends.
* Card base - Orchid Oasis, for this card I used 8 1/2” x 5 1/2” scored and folded at 4 1/4”
* DSP - In Color 2022-2024 6”x6” DSP - Orchid Oasis
* 2022-2024 In Color Matte Dots -Orchid Oasis - 5
* Stampin’ Blends - all listed card above plus Orchis Oasis (light) and Flirty Flamingo (light)
RHINO READY PARTIAL FRONT PANEL CARD
SUPPLIES FOR THIS CARD
* Ready Rhino Bundle
* Card base - Sahara Sand 11” x 4 1/4” scored at 5 1/2”
* Mats - Early Espresso - 2, cut at 5 3/8” x 2 5/8
* DSP - He’s the Man Specialty DSP, Sahara Sand pattern - 2 pieces cut at 5 1/4” x 2 1/2”
* Basic White, Pear Pizzazz, Early Espresso, and Poppy Parade for stamping and die cutting
* Inks - Memento Tuxedo Black, Old Olive, Early Espresso; Stampin’ Blends: Granite Gray (light & dark), Crumb Cake (light), Daffodil Delight (dark)
* Sponge dauber
* Adhesive, liquid adhesive, dimensionals
ASSEMBLY
* Stamp the two rhino images and the bird image. Color the images. Stamp 5 of the grass images on Pear Pizzazz cardstock with Old Olive ink.
* Die cut the stamped images, 2 party hats, 1 each of the tree foliage (larger and smaller), and their corresponding tree trunks.
* From the card base - Place the card base in paper trimmer at 1 1/2” along the 4 1/4” side. Cut down to the score line (5 1/2”). Turn the cardstock 1/4 of a turn, the 11” side is now along the top. Slide the cardstock to the 5 1/2” mark. Cut down 1 1/2”. Remove the piece that has been cut away.
* Mat the pieces of DSP onto the mats. Adhere one panel to the front of the card and one inside the card.
* Add the grass to the front panel of rather card. Glue the party hat on the rhino image. Attach the image to the card front with dimensionals.
* Use the sponge dauber and Old Olive ink to add a bit of color, contrast, and depth to the tree foliage. Adhere the tree pieces to the top of the card inside panel
* Stamp the sentiment with Early Espresso ink toward the left of the inside panel and adhere the panel to the inside o& the card. Adhere the hat to the rhino image, adhere the image to the panel. Adhere the bird in place with a small piece of dimensional.
RHINO READY SLIDE LOCK GATE FOLD CARD
*Ready Rhino Bundle
* Card base - Coastal Cabana 8 1/2” x 5 1/2” scored 2 1/8” and 6 3/8”. Fold both scored panels toward center of the card.
* Inside panel - Basic White4 3/4” x 3 1/2”
* Mat for inside panel - Enjoy the Journey DSP (Garden Green / Coastal Cabana pattern) 4” x 5 1/4”
* DSP for front panels - Enjoy the Journey (same as above) cut 2 at 1 7/8” x 5 1/4”
* Focal image - Coastal Cabana, Basic White, Garden Green cardstock
* Slide lock mechanism - 3 pieces of Basic White cardstock cut at 3 1/2” x 2 1/4” and one piece of Coastal Cabana cardstock cut at 3 1/2” x 2 1/4”
* Inks - Memento Tuxedo Black, Garden Green, Coastal Cabana; Stampin’ Write Marker - Garden GreenStampin’ Blends - Gray Granite (light & dark), Crumb Cake (light), Parakeet Party (light), Daffodil Delight (light)
* Blending brush
* Deckled Rectangles Dies - 2 5/8” x 3 7/8” die, and 2 1/4” x 3 1/2” die
* Stampin’ Seal + or Tear & Tape for slide lock mechanism, regular adhesive, dimensionals
ASSEMBLY
* Stamp the rhino and noise maker with Tuxedo Black ink, and color with Stampin’ Blends; stamp greeting on Basic White inside panel with Garden Green ink.
* Adhere the two strips of DSP to the sections of the card front. Adhere the inside panel to the DSP mat, then adhere this piec to the inside of the card.
* Die cut the Deckled Rectangles- largest in Coastal Cabana, smallest in Basic White; use Garden Green cardstock for the 8 leaves - 4 each of the two sizes, and one each of the two tree foliage dies that do not have the cut out lines on them (I used them for grass); use Coastal Cabana for the party hat; die cut the noise maker and the rhino.
* Use the Garden Green marker to color in the debossed areas on the hat.
* Use the blending brush and the Coastal Cabana ink to add a touch of color to the Basic White Deckled Rectangle. Adhere the leaves and the grass to this piece. Adhere the party hat and noisemaker to the rhino. Use dimensionals to adhere the rhino to the piece. Adhere this piece to the Coastal Cabana deckled rectangle.
* Assemble the slide lock mechanism.
1. Fold two of the 3 1/2” x 2 1/4” pieces of Basic White cardstock in half longways. Go over the folds with a bone folder to make the creases nice and sharp. Your two pieces that look something like this > <
2. Now put adhesive (Stampin’ Seal +) on one side of each > and adhere the pieces to the remaining 3 1/2” x 2 1/4” piece of white cardstock so they form something that resembles >< .
3. Now apply adhesive to the other side of each < and adhere this to the 3 1/2” x 2 1/4” piece of Coastal Cabana cardstock. The slide lock mechanism is complete.
4. Place adhesive on the white side of the mechanism and adhere it to the back side of the focal piece. Line up the mechanism with each front panel of the card; the panels should slide between the folded pieces of the mechanism. Slide your focal piece into place to keep your gate fold card closed!
There you go, a cute new bundle and three fun fold cards. I hope you try making these fun fold cards. They are a lot of fun to make and are sure to bring smiles to the faces of the recipients.
Thanks for stopping by. Until next time . . .
Stamp Happy!
Kim
All stamps and stamped images ©️1990-2023 Stampin’ Up!®️
No comments:
Post a Comment