PEEKABOO! IT’S A TREAT FOR YOU! - A STAMP HAPPY HOLIDAYS POST

Hi Stampers,

Today’s Stamp Happy Holiday’s project is super simple treat bags. The bags I am using for the project are the PEEKABOO TREAT BAGS found on page 140 of the Stampin’ Up!®️ 2022-2023 Annual Catalog or view in my ONLINE STORE.  

Each package contains 10 food safe treat bags; 5 kraft and 5 white.  The bags feature a ziplock type closure. They are ready for you to decorate and fill with a cookie or two, candies, nuts, or other treats. Let’s take a look at my samples:

To view Stampin’ Up!sample projects see pages 19 and 50 in the annual catalog and page 57 in the Stampin’ Up! July -December 2022 Mini Catalog.

I plan to use these bags as party favors for Halloween and I will put one at each place setting on Thanksgiving.

PEEKABOO TREAT BAGS

CREATING THE BACKGROUND ON THE BAGS

I added color to treat bags with a Stampin’ Spritzer that contained a mixture of isopropyl alcohol and re-inker. A mixture of water and re-inker will work as well, but the color will take longer to dry.

I used an cardboard box as a tray for my spritzing. This contained the mess. I placed paper towel in the box prior to spritzing each bag. This insured a clean surface for each bag, and kept any wet ink or pools of ink from coloring the back side of the bag. I also used a strip of scrap cardstock to cover the peekaboo window while spritzing the color onto the bag. The strip of cardstock should be cut at 1 3/8” wide. The bag is 4” across, so the length of the strip should be at least 5”  to cover the peekaboo window and give room on each end to maneuver the strip into place and remove it after spritzing. 

It is easy to mix the alcohol and ink in the spritzer. Fill the Stampin’ Spritzer 1/2 - 3/4 of the way with the alcohol. Add 6-10 drops of re-inker to the spritzer (more if you like). If you will be spritzing only a bag or two you can use less alcohol and less re-inker. Place the lid on the spritzer and give the spritzer a gentle shake or two to mix the ink with the alcohol. 

 

Place the paper towel on the bottom of the cardboard box. Place the treat bag on top the paper towel. Cover the peekaboo window with the strip of cardstock. You can secure the strip with tape if you like.

Begin to spritz the color onto the bag. Continue until you get the look you like. Allow the alcohol /ink to dry a few moments before adding stamped images, die cuts, etc to the treat bag.

The treat bag is ready to be decorated as you please.

LOVELIEST DAY PEEKABOO TREAT BAG

SUPPLIES FOR THIS BAG

* White Peekaboo treat bag

* Hello Harvest Bundle

* Pumpkin Pie Ink for spritzer.

* Scraps of Basic White and Pale Papaya cardstock (I lightly spritzed these pieces of cardstock with the Pumpkin Pie / alcohol mixture. 

* Small scrap of Old Olive cardstock to die cut vines

* Inks - Pumpkin Pie, Early Espresso; Stampin’ Blends - Pale Papaya (light & dark), Pumpkin Pie (light)

* Ribbon of choice - about 18” (I used some retired Old Olive twill ribbon. I encourage you to use what you have on hand. 

* Adhesive, dimensionals 

Note - I filled this bag with mixed nuts. I used about 3 - 4 Tablespoons of nuts.

BEWITCHING TREAT BAG

SUPPLIES FOR THIS BAH

* White Peekaboo Treat Bag

* Bewitching Bundle & Best Witches stamp set

* Granny Apple Green ink for spritzer

* Scraps of Basic White to stamp hat and frog

* Ink - Memento Tuxedo Black, Gorgeous Grape; Stampin’ Blends - Granny Apple Green (dark), Pumpkin Pie (light), Highland Heather (light & dark), Parakeet Party (light & dark

* Black Baker’s Twine (about 38”) and Metallic Mesh Ribbon about 5” (or twine and ribbon of choice)

* Adhesive, dimensionals 

Note - I filled this bag with 3 TBSP of Reese’s Pieces

Most schools require treats brought into the classroom be packaged. The individual snack sized bags of Reese’s Pieces, m & m’s, Skittles, etc will fit inside these treat bags.

NUTS ABOUT TREATS

SUPPLIES FOR THIS BAG

* Nuts About Squirrels stamp set

* Kraft treat bag

* Early Espresso ink to mix with alcohol (darker colored ink work best on the kraft colored bags)

* Basic White cardstock for stamping

* Inks - Early Espresso, Cajun Craze, Crumb Cake Old Olive, Crushed Curry

* Stylish Shapes Dies (circle that fits around greeting)

* Ribbon - about 8”

* Adhesive, dimensionals 

NOTE - I used a bit less than three TBSPs of nuts is this bag.

SCARY CUTE TRICK OR TREAT TIME

SUPPLIES FOR THIS BAG

* White treat bag

* Scary Cute stamp set

* Pumpkin Pie ink to mix with the alcohol

* Inks - Memento Tuxedo Black

* Basic Black Baker’s Twine (about 38”) and Metallic Mesh Ribbon 5” or so

Note - I used a mix of candy corn and peanuts in this bag about 1 1/2 TBSP each!

PEEKABOO TREAT BAGS

These treat bags are unique, and so easy to decorate. I think I will mark some with Christmas themes, fill them, and place them in a basket on my coffee table to offer to friends and family who stop by for a visit.

That is all for today. Thank you so much for stopping by. Until next time…

Stamp Happy!

Kim

All stamps and stamped images ©️1990-2022 Stampin’ Up!®️

BEWITCHING SPELL WITH STAIR STEP DIMENSION; A STAMP HAPPY HOLIDAYS POST

Hi Stampers!

Welcome! Today I have a Halloween card to share. I enjoy Halloween. I grew up in a close knit rural community back in the day when trick or treating meant wearing homemade costumes and receiving homemade popcorn balls, caramel apples, cookies, and sometimes cupcakes as opposed to candy.  Halloween parties meant bobbing for apples, hayrides, and wiener roasts. Fun times! Creating Halloween cards brings back all those great memories!

Today’s card uses the BEWITCHING BUNDLE (Bewitching stamp set and Witch Hat Builder punch) and help from a couple more stamp sets, plus a technique I call stair step dimension. Sometimes I want different levels of dimension. In my sample cards you will see the stamped feet / legs that is the basic layer of dimension. It is simply stamped right onto the focal panel.  The next level of dimension is the sign. The dimension for this is achieved by adhering two same sized die cut squares together. This adds just a tad bit of dimension. The final level of dimension is achieved with dimensionals (witch hat).  That is my stair step dimension technique! Let’s look at the cards!

As you can see the two cards are similar. I used the Witch Hat Builder Punch and Basic Black cardstock to create the hat. When using cardstock for the hat it is easy to switch the direction of the hat. To create the hat band I covered the punched band with Highland Heather washi tape, and trimmed the tape with paper snips.

BEWITCHING STAMP SET

BEST WITCHES & SCARY CUTE STAMP SETS

SUPPLIES FOR THE CARD

* Witch Hat Builder Punch

* Inks - Memento Tuxedo Black, Daffodil Delight

* Stampin’ Blends - Parakeet Party (light & dark), Highland Heather (dark), Daffodil Delight (dark), Smoky Slate (light), Color Lifter

* Matte Black Dots -3

* Glitter Washi Tape - Highland Heather

* Stylish Shapes Dies - square (2” x 2”)

* Adhesives & dimensionals

* Card base - Parakeet Party 4 1/4” x 11” scored & folded at 5 1/2”

* Larger scraps of Basic Black and Parakeet Party cardstock for die cutting

* Basic White cardstock for focal panel and for inside panel cut at 4 3/4” x 5”

* DSP - Celebrate Everything, Black with Crushed Curry stars. Cut 2 at 5 1/4” x 4”

TO MAKE THE CARD

* DIE CUT & PUNCH

* Punch out the witch hat and band from Basic Black cardstock. Use the die to cut two squares from the Parakeet Party scrap.

* Cover the hat band with the Highland Heather Glitter Washi Tape, and trim away access tape.

* Adhere the band to the hat.

STAMP

* Stamp the witch feet (Bewitching) and frog on focal panel, stamp the greeting (from Best Witches) in the center of one of the Parakeet Party die cut squares, stamp the inside sentiment ( Scary Cute), and witch hat with the Memento Black ink. Stamp the stars (Bewitching) on the inside panel with Daffodil Delight. Once the focal panel is assembled use the Daffodil Delight ink to stamp a few star images around the witch. Waiting until after adding the witch gives you some wiggle room for placement of the sign and witch hat.

* Use the Stampin’ Blends to add color to the feet, the frog, and the stamped witch hat. Use the Smoky Slate Stampin’ Blend and color lifter to add a bit of shadow and to ground the images.

ASSEMBLING

* Adhere the 2 Parakeet Party die cuts together.

* Adhere the sign to the focal panel along the top of the witch legs, the use dimensionals to adhere the witch hat above the sign.

* Adhere the focal panel to the DSP and adhere this piece to the card front.

* Adhere the inside panel to the DSP, and adhere this piece to the inside of the card.

* Add the Matte Black Dot to the sign.

The stair step dimension is not the only demensional elements on the card. The placement of the frog makes it appear to be behind the witch, The shadowing under the frog and witch not only “ground” the images, but also creates the illusion of the shadow being 2 dimensional under a 3 dimensional object. The hat band being adhered to the hat adds dimension. The Matte Black Dots add one more touch of dimension to the card. Finally, the card layers add dimension as well! What other ways can you think of to add dimensional interest to your cards? 

Thanks you so much for stopping by for this edition of my Stamp Happy Holiday series. Until next time… 

Stamp Happy!

Kim

All stamps and stamped images ©️1990 - 2022 Stampin’ Up!®️

SHOP DEALS